1. Joying Android 12.0 Qualcomm Snapdragon System Update

    新建网页 1

    Joying Android 12.0 Qualcomm Snapdragon System Update

    Note:

    * This update is only workable for the Android 12.0 QCM6125 Qualcomm Snapdragon System car radio.

    * Different updated file for different head unit version system. Please check clearly below updated tips. If you are still confused on the update details, please contact us first. Otherwise, your CarPlay/Android Auto function cannot be used after updating and you need to pay us $10 to activate this function again.

    * Please update the head unit system with Windows 10 computer. this is very important.


    Following is the update (2024-11-14) for Android 12.0 radio

    Two points can be solved by system update.

    1. Connection trouble on carplay/android auto.

    2. Support right drive home screen UI .

     

    Here is the firmware for 1280*800/1920*720/1280*720 radio with "LT". please check below exampled picture:

    For example stereo model: JY-HZS01N4 JY-UZS03N4

    Updated file please click Here

     

    Here is the firmware for 1920*1080 / 1920*1200 / 2000*1200 radio with "LT", please check below exampled picture:

    Updated file please click Here

     

    Below are the unzipped files example:

     

     

     


    Following is the update (2024-8-16) for Android 12.0 radio

    Here is the firmware for 1280*800/1920*720/1280*720 radio with "LT". please check below exampled picture:

    For example stereo model: JY-HZS01N4 JY-UZS03N4

    Updated file please click Here

    Here is the firmware for 1280*800/1920*720/1280*720 radio without "LT". please check below exampled picture:

    Updated file please click Here

    Here is the firmware for 1920*1080 / 1920*1200 / 2000*1200 radio with "LT", please check below exampled picture:

    Updated file please click Here

     

    Here is the firmware for 1920*1080 / 1920*1200 / 2000*1200 radio without "LT", please check below exampled picture:

    Updated file please click Here

     

    Here is the firmware for 1280*720/1024*600/800*480 radios with below UI:

    Only applicable for these models: UZ135N4, UZ139N4, VZ130N4, VZ131N4, HZ123N4

    Updated file please click Here


     

    Following are the tips on how to do the system update:

    Please make sure that your USB disk need to be formatted as FAT32 !!

    Firstly please download and unzip the updated firmware from your windows 10 computer.

    Open the unzipped folder, highlight all the files in and copy & paste to the USB disk 

    and connect it to the JOYING OTG USB port.

    NOTE: *ONLY those unzipped files in the USB.
             * You don’t need to unzip the “update_car “ package.

    Below are the unzipped files example:

    Secondly The update will take about 5-6 minutes.

    During the update process, please do not power off or reboot the stereo.

    When these words appear" please remove update device device will reboot", please remove the USB disk.

     


    Attention: The upgrade takes around 5-8 minutes. After the firmware is updated and enters the Home page, pls wait 1-2 minutes due to the system needs time to loading the files. And you may need to re-setup your settings.

     

    Have any problem during the system update, please contact us support@joyingauto.com or info@joyingauto.com

    Read more